Alterações no passo nº 5
Edição por Jake Hallem —
Edição aprovada por Jake Hallem
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Using the Phillips head screwdriver, remove the two (Specific) screws on the back of the motor. | |
| - | [* icon_note] Beware that there is a nut holding the screw in place on the opposite side of the motor |
| + | [* icon_note] Beware that there is a nut holding the screw in place on the opposite side of the motor. |
| [* icon_note] Beware once the screw is removed the metal brace where the screws are located will come off. |