Menu

Suas configurações

Minha bancada de trabalho

Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Carrinho

Parece que seu carrinho de compras está vazio

Visite Nossa Loja

Alterações no passo #6

Edição por pweckesser —

Edição aprovada por pweckesser

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Rotate the device 180 degrees so that the bottom of the device is facing you.
[* red] A ribbon connects the battery on the back-platerear cover, to the motherboard therefore, slowlymotherboard. Slowly lift the bottom of the back-platerear cover up until you can see the ribbon.
[* red] A ribbon connects the battery on the back-platerear cover, to the motherboard therefore, slowlymotherboard. Slowly lift the bottom of the back-platerear cover up until you can see the ribbon.
[* light_blue] Use a spudger to push the ribbon away from the motherboard and parallel to the motherboard in order to remove the ribbon.
[* black] Separate the back-platerear cover by lifting it up away from the main system.
[* icon_note] When reassembling the backrear cover to the motherboard, reinserting the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into place.
[* black] Separate the back-platerear cover by lifting it up away from the main system.
[* icon_note] When reassembling the backrear cover to the motherboard, reinserting the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into place.