Pular para o conteúdo principal

Alterações no passo #6

Edição por Kevin Hua

Edição aprovada por Kevin Hua

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Rotate the device 180 degreesdegrees so that the bottom of the device is facing you.
[* black] Rotate the device 180 degreesdegrees so that the bottom of the device is facing you.
[* red] A ribbon connects the battery on the back-plate to the motherboard therefore, slowly lift the bottom of the back-plate up until you can see the ribbon.
[* black] Use the plastic opening tool to push the ribbon parallel to the motherboard and remove the ribbon.
[* black] Use the plastic opening tool to push the ribbon parallel to the motherboard and remove the ribbon.
[* black] Separate the back-plate by lifting it up away from the main system.