Menu

Suas configurações

Minha bancada de trabalho

Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Carrinho

Parece que seu carrinho de compras está vazio

Visite Nossa Loja

Alterações no passo #6

Edição por Michael Bianchini —

Edição aprovada por Michael Bianchini

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Onceblack] Rotate the back-plate is completely loose from the main system, do not pull the two apartdevice 180 degrees.
[* red] A ribbon connects the battery on the back-plate to the motherboard, thereforemotherboard therefore, slowly lift the bottom of the back-plate up until you can see the ribbon.
[* icon_caution] Onceblack] Rotate the back-plate is completely loose from the main system, do not pull the two apartdevice 180 degrees.
[* red] A ribbon connects the battery on the back-plate to the motherboard, thereforemotherboard therefore, slowly lift the bottom of the back-plate up until you can see the ribbon.
[* black] Use the plastic opening tool to push and remove the ribbon.
[* black] Separate the back-plate by lifting it up away from the main system.
[* black] Separate the back-plate by lifting it up away from the main system.