Pular para o conteúdo principal

Alterações no passo #6

Edição por Kevin Hua

Edição aprovada por Kevin Hua

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Rotate the device 180 degrees so that the bottom of the device is facing you.
[* red] A ribbon connects the battery on the back-plate to the motherboard therefore, slowly lift the bottom of the back-plate up until you can see the ribbon.
[* black] Use the plastic opening tool toa spudger to push the ribbon away from the motherboard and parallel to the motherboard andin order to remove the ribbon.
[* black] Use the plastic opening tool toa spudger to push the ribbon away from the motherboard and parallel to the motherboard andin order to remove the ribbon.
[* black] Separate the back-plate by lifting it up away from the main system.
[* icon_note] When reassembling the back cover to the motherboard, reinserting the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into place.

Imagem 3

Nenhuma imagem anterior

Adicionado