Pular para o conteúdo principal

Alterações no passo #5

Edição por pweckesser

Edição aprovada por pweckesser

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Continue toNext, remove the back by removing the ten 5.92mm T5 Torxtorx screws located underneath the kickstand.
[* orange] Remove the seven 5.87mm T5 Torxtorx screws located under the camera casing.
[* black] Take offDisconnect the back platerear cover from the main shell of the system by loosening it with a spudger where the gaps exist.
[* icon_caution] There is an electrical ribbon connecting the back platerear cover to the motherboard. Do not pull apart the back platerear cover from the motherboard once you have loosened the back platerear cover from the main system.
[* yellow] Continue working your way around to each corner and loosen the snap-ons on each side until the back platerear cover comes off.
[* red] Continue toNext, remove the back by removing the ten 5.92mm T5 Torxtorx screws located underneath the kickstand.
[* orange] Remove the seven 5.87mm T5 Torxtorx screws located under the camera casing.
[* black] Take offDisconnect the back platerear cover from the main shell of the system by loosening it with a spudger where the gaps exist.
[* icon_caution] There is an electrical ribbon connecting the back platerear cover to the motherboard. Do not pull apart the back platerear cover from the motherboard once you have loosened the back platerear cover from the main system.
[* yellow] Continue working your way around to each corner and loosen the snap-ons on each side until the back platerear cover comes off.