Pular para o conteúdo principal

Alterações no passo #5

Edição por Kevin Hua

Edição aprovada por Kevin Hua

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Continue to remove the back by removing the 10 T5 (5.92 mm) Torx screws located underneath the kickstand
[* orange] Remove the 7 T5 Torx (5.87 mm) screws located under the camera casing.
[* yellow] Now you will be taking off the back plate from the main system. Begin loosening the back-plate with a spudger where gaps exist.
[* black] There is an electrical ribbon connecting the back plate to the motherboard. Do not pull apart the back plate from the motherboard once you have loosen the back plate from the main system.
[* black] Continue working your way around to each corner and loosen the snap-ons on each side until the back plate comes off