Skip to main content

Alterações no passo #5

Edição por Bailey Dowler

Edição aprovada by Bailey Dowler

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Continue to remove the back by removing the ten 5.92mm T5 Torx screws located underneath the kickstand.
[* orange] Remove the seven 5.87mm T5 Torx screws located under the camera casing.
[* black] Take off the back plate from the main system by loosening it with a spudger where gaps exist.
[* icon_caution] There is an electrical ribbon connecting the back plate to the motherboard. Do not pull apart the back plate from the motherboard once you have loosened the back plate from the main system.
[* blackyellow] Continue working your way around to each corner and loosen the snap-ons on each side until the back plate comes off.
[* blackyellow] Continue working your way around to each corner and loosen the snap-ons on each side until the back plate comes off.

Imagem 2

Versão Antiga

Nova Versão