Ir para o conteúdo principal

Alterações no passo #5

Edição por Michael Bianchini

Edição aprovada de Michael Bianchini

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Continue to remove the back by removing the ten 5.92mm T5 Torx screws located underneath the kickstandkickstand.
[* red] Continue to remove the back by removing the ten 5.92mm T5 Torx screws located underneath the kickstandkickstand.
[* orange] Remove the seven 5.87mm T5 Torx screws located under the camera casing.
[* yellow] Now you will be takingblack] Take off the back plate from the main system. Beginsystem by loosening the back-plateit with a plastic opening tool where gaps exist.
[* icon_caution] There is an electrical ribbon connecting the back plate to the motherboard. Do not pull apart the back plate from the motherboard once you have loosenloosened the back plate from the main system.
[* icon_noteblack] Continue working your way around to each corner and loosen the snap-ons on each side until the back plate comes offoff.
[* yellow] Now you will be takingblack] Take off the back plate from the main system. Beginsystem by loosening the back-plateit with a plastic opening tool where gaps exist.
[* icon_caution] There is an electrical ribbon connecting the back plate to the motherboard. Do not pull apart the back plate from the motherboard once you have loosenloosened the back plate from the main system.
[* icon_noteblack] Continue working your way around to each corner and loosen the snap-ons on each side until the back plate comes offoff.

Imagem 2

Versão Antiga

Nova Versão