Pular para o conteúdo principal

Alterações no passo #3

Edição por Michael Ruch

Edição aprovada por Michael Ruch

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* green] Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right side of the kickstand.
[* black] RemoveMake sure when removing the two screwsscrews to be careful to prevent stripping of the head.
[* black] GentlyWith all the screws removed gently wiggle the stand side to side until the lever in the middle is free, releasing the stand.
[* green] Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right side of the kickstand.
[* black] RemoveMake sure when removing the two screwsscrews to be careful to prevent stripping of the head.
[* black] GentlyWith all the screws removed gently wiggle the stand side to side until the lever in the middle is free, releasing the stand.