Alterações no passo #3
Edição por Michael Ruch —
Edição aprovada por Michael Ruch
- Excluído
- Adicionado
- Sem alteração
Linhas de Passo
| [* green] Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right |
| [* green] Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right |
| [* black] Make sure when removing the screws to be careful to prevent stripping of the head. |
| [* black] With all the screws removed gently wiggle the stand side to side until the lever in the middle is free, releasing the stand. |