Ir para o conteúdo principal

Alterações no passo #2

Edição por Tobias Isakeit

Edição aprovada por Tobias Isakeit

Antes
Depois
Sem alteração

Linhas de Passo

-[* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.
-[* black] Lift the rear glass with the suction cup to create a gap between the glass and the frame.
+ [* icon_note] If the phone's rear glass is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed.
+[* black] Lift the rear glass with the suction handle to create a gap between the glass and the frame.
[* black] Insert an opening pick into the gap.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
[* black] Slide the opening pick to the bottom right corner of the phone.