Ir para o conteúdo principal

Alterações no passo #1

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pull the battery cable connector towards the battery to disconnect it from its socket.
[* black] If the connector is stubborn, push a little at one side, then the other, to "walk" it out of its socket.
- [* black] Do not use too much force. If you do not get along, push down the small nose of the connector at the centre of the socket. It might be covered by the foam pad. See close-up.
+ [* red] If you have trouble walking the connector out of the socket, use the point of a spudger to gently push on the connector indent to slide the connector out.
[* icon_caution] Do not pull up.
[* black] Open the display and press the power button for five seconds to drain any remaining charge from the system.

Imagem 2

Versão Antiga

Nova Versão