Ir para o conteúdo principal

Alterações no passo #1

Edição por Ivan Kellenberger

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pull the battery cable connector towards the battery to disconnect it from its socket.
[* black] If the connector is stubborn, push a little at one side, then the other, to "walk" it out of its socket.
+ [* black] Do not use too much force. If you do not get along, push down the small nose of the connector at the centre of the socket. It might be covered by the foam pad. See close-up.
[* icon_caution] Do not pull up.
[* black] Open the display and press the power button for five seconds to drain any remaining charge from the system.

Imagem 2

Nenhuma imagem anterior

Adicionado