Alterações no passo nº 22
Edição por Gregg Ferry —
Edição aprovada por Gregg Ferry
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] connecting fuse, continued |
|---|---|
| + | [* black] Put about 1cm of heat shrink over the lead a push it near to the battery 032 |
| + | [* black] Wrap the tinned lead 360° around the U in the fuse lead This is a one shot deal: Using the linemen’s pliers, crimp the U bend tight. The lead wire from the battery should not move. Solder the joint. Do not dwell with the soldering iron on the connection! 033 |
| + | [* black] Slide the heat shrink over the joint and shrink it with heat (I used the soldering iron) |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado