Pular para o conteúdo principal

Alterações no passo #4

Edição por Christopher Wright

Edição aprovada por Christopher Wright

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blue] The hard drive ribbon cable is held in place by a black latch on the hard drive.
[* green] Using a small flat head screwdriver, flip the black latch up 90 degrees.
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white partconnector piece.
[* icon_note] This may be a little difficult to move, so take your time and go easybe careful.
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white partconnector piece.
[* icon_note] This may be a little difficult to move, so take your time and go easybe careful.