Pular para o conteúdo principal

Alterações no passo #4

Edição por Andrew Optimus Goldheart

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* blue] Notice the tab holding theThe hard drive ribbon cable is held in place by a black latch on the hard drive. (first picture)
[* green] Using a small flat head screwdriver, flip the black latch up 90 degreesdegrees. (second picture)
[* blue] Notice the tab holding theThe hard drive ribbon cable is held in place by a black latch on the hard drive. (first picture)
[* green] Using a small flat head screwdriver, flip the black latch up 90 degreesdegrees. (second picture)
[* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white part.
[* icon_note] This may be a little difficult to move, so take your time and go easy.