Alterações no passo nº 10
Edição por Jennifer Berg —
Edição aprovada por Jennifer Berg
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Disconnect the fingerprint connector |
|---|---|
| [* black] Use the point of a spudger to pry up and disconnect the fingerprint connector from its socket. | |
| [* icon_note] When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket. | |
| [* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage. |