Alterações no passo nº 2
Edição por Jennifer Berg —
Edição aprovada por Jennifer Berg
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Create a gap in the seam |
|---|---|
| [* black] Apply a suction cup to the heated bottom edge of the back cover. | |
| [* icon_caution] Make sure you did not mistake the screen side for the back cover side. | |
| [* icon_note] If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. | |
| [* black] Lift on the suction cup with strong, steady force to create a gap. | |
| [* icon_note] Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_caution] Don't use metal tools to pry, or you'll mar or shatter the glass back cover. If the panel won't budge, apply more heat, either with a hair dryer or heat gun. |