Alterações no passo nº 2
Edição por Rin Blackbird —
Edição recusada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Apply a suction cup to the heated bottom edge of the back cover. |
|---|---|
| - | [* icon_caution] Make sure you did not mistake the screen side for the back cover side. |
| - | [* icon_note] If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. |
| + | [* black] Apply a suction cup to the heated bottom edge of the screen. |
| + | [* icon_note] If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. |
| [* black] Lift on the suction cup with strong, steady force to create a gap. | |
| [* icon_note] Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again. | |
| [* black] Insert an opening pick into the gap. |