Alterações no passo nº 3
Edição por Michael Cioffi —
Edição aprovada por Michael Cioffi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Unscrew screws in section of bead that you are going to remove |
|---|---|
| - | [* icon_reminder] If vinyl bead, then break taped underside with corner of putty knife carefully |
| - | [* black] Cut the metal corner bead with tin snips |
| + | [* black] Unscrew screws in section of bead that you are going to remove. |
| + | [* icon_reminder] If it is a vinyl corner bead, then break taped underside with corner of putty knife carefully. |
| + | [* black] Cut the metal corner bead with tin snips. |
| [* icon_note] If Vinyl, then use your utility knife. | |
| [* black] Measure new corner bead and cut. | |
| [* black] Place new corner bead on corner and fasten secured. | |
| [* black] Fasten with either screws, or tape on vinyl. |