Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por Kristen Gismondi —

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

[* black] Sand area with 80 grit sandpaper.
[* black] Wipe down with damp cloth, sponge, or paper towel.
- [* icon_reminder] Be careful to not wet down the patch with too much water. Only minimum amount of dampness needed to wipe away sanding dust.
+ [* icon_note] Be careful to not wet down the patch with too much water. Only minimum amount of dampness needed to wipe away sanding dust.
[* black] Apply thinner coat of joint compound with a 6, or 8 inch putty knife.
- [* icon_reminder] Pay attention to put pressure on the outside edge.
+ [* icon_note] Pay attention to put pressure on the outside edge.
[* black] Let dry for 2 hours.