Alterações no passo #3
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Once the adhesive is aligned, use your fingers to press the adhesive |
| [* black] Once the adhesive is aligned, use your fingers to press the adhesive |
| [* black] When you are ready to stick the battery onto the frame, carefully peel away the '''blue plastic liner''' to expose the adhesive. |
| [* black] Set the battery lightly in place. |
| [* black] Plug in the battery connector ''temporarily'' to ensure that the cable reaches the socket. Disconnect the battery before resuming re-assembly. |
| [* black] Press the battery perimeter firmly with your fingers to help the adhesive bond. |