Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Arthur Shi —

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Once the adhesive is aligned, use your fingers to press the adhesive onto the frame.
[* black] When you are ready to stick the battery onto the frame, carefully peel away the '''blue plastic liner''' to expose the adhesive.
[* icon_note] When layingblack] Set the battery lightly in place, plugplace.
[* black] Plug in the battery connector ''temporarily'' to ensure that the cable reaches the socket. Disconnect the battery before resuming re-assembly.
[* black] Press the battery perimeter firmly with your fingerfingers to help the adhesive bond.
[* icon_note] When layingblack] Set the battery lightly in place, plugplace.
[* black] Plug in the battery connector ''temporarily'' to ensure that the cable reaches the socket. Disconnect the battery before resuming re-assembly.
[* black] Press the battery perimeter firmly with your fingerfingers to help the adhesive bond.