Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Beforeicon_note] Before you begin, notefigure out how the pre-cut adhesive strip should be oriented inand which surface to attach it to.
[* black] If your pre-cut adhesive has pull tabs on the inner perimeter, the adhesive will attach to the phone's battery well first.
[* black] If your pre-cut adhesive strip has pull tabs on the outer perimeter, the adhesive will attach to
the battery wellfirst.
[* black] Beforeicon_note] Before you begin, notefigure out how the pre-cut adhesive strip should be oriented inand which surface to attach it to.
[* black] If your pre-cut adhesive has pull tabs on the inner perimeter, the adhesive will attach to the phone's battery well first.
[* black] If your pre-cut adhesive strip has pull tabs on the outer perimeter, the adhesive will attach to
the battery wellfirst.
[* black] Peel the '''clear plastic liner''' off of the pre-cut adhesive strip, exposing the adhesive.
[* black] Line up a long edge of the adhesive with the edge of the battery wellproper surface, as determined above.
[* black] Set the adhesive down lightly on the framesurface.
[* black] Line up a long edge of the adhesive with the edge of the battery wellproper surface, as determined above.
[* black] Set the adhesive down lightly on the framesurface.
[* black] If it is not properly aligned, you can carefully peel the adhesive back up and realign it.