Alterações no passo #2
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Before you begin, note how the pre-cut adhesive strip should be oriented in the battery well. |
| [* icon_note] The short, thicker edge should rest right below the motherboard. |
| [* black] Peel the '''clear plastic liner''' off of the pre-cut adhesive strip, exposing the adhesive. |
| [* black] Line up a long edge of the adhesive with the edge of the battery well. |
| [* black] Set the adhesive down lightly on the frame. |
| [* black] If it is not properly aligned, you can carefully peel the adhesive back up and realign it. |