Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #7

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Line up the rear camera bezel with the rear camera and flash cutoutscutouts on the rear glass, then set it down on the adhesive.
[* black] Make sure the camera bezel is completely seated in the rear glass's camera cutout so that the bezel sitslays flat against the glass.
[* black] Line up the rear camera bezel with the rear camera and flash cutoutscutouts on the rear glass, then set it down on the adhesive.
[* black] Make sure the camera bezel is completely seated in the rear glass's camera cutout so that the bezel sitslays flat against the glass.
[* black] Apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly.
[* black] When you are ready to install the rear glass, but before you seal the phone, peel off the black backing covering the camera glass.