Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #7

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereLine up the rear camera bezel with the rear camera and flash cutouts, then set it down on the adhesive.
[* black] Make sure the camera bezel is completely seated in the rear glass's camera cutout so that the bezel sits flat against the glass.
[* black] Apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly
.
[* black] Insert wisdom hereLine up the rear camera bezel with the rear camera and flash cutouts, then set it down on the adhesive.
[* black] Make sure the camera bezel is completely seated in the rear glass's camera cutout so that the bezel sits flat against the glass.
[* black] Apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly
.