Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #5

Edição por Adam O'Camb

Edição aprovada de Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert wisdom herePeel away the clear backing from the camera bezel adhesive strip, exposing the adhesive on one side.
[* black] Very carefully line up the rear camera and flash cutouts on inside of the rear glass with the same cutouts on the adhesive strip.
[* black] Set the adhesive strip on the glass and make sure it lines up without the adhesive overlapping any edges of the glass.
[* black] Apply pressure to the adhesive so that it bonds to the glass.
[* black] Peel the green backing away from the adhesive strip. Make sure the adhesive does not come off of the glass with the backing
.
[* black] Insert wisdom herePeel away the clear backing from the camera bezel adhesive strip, exposing the adhesive on one side.
[* black] Very carefully line up the rear camera and flash cutouts on inside of the rear glass with the same cutouts on the adhesive strip.
[* black] Set the adhesive strip on the glass and make sure it lines up without the adhesive overlapping any edges of the glass.
[* black] Apply pressure to the adhesive so that it bonds to the glass.
[* black] Peel the green backing away from the adhesive strip. Make sure the adhesive does not come off of the glass with the backing
.