Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #14

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] With the metal shield tapeMetal Shield Tape removed and the foam tapeFoam Tape scraped off, the Microphone and PIR Sensorcomponents on Flex PCB can bedbe reviewed
[* black] With the metal shield tapeMetal Shield Tape removed and the foam tapeFoam Tape scraped off, the Microphone and PIR Sensorcomponents on Flex PCB can bedbe reviewed
[* blue] [http://vespermems.com/products/vm1010|Vesper VM1010 Wake-On-Sound MEMS Microphone]
[* light_blue] TDK ICS-41350 Microphone
[* red] Light Detector
[* orange] Multi-Color LED
[* green] [http://www.excelitas.com/Downloads/PYD1588Datasheet.pdf|PYD1548 Excelites Tech Low Power Motion PIR Sensors]
[* black] The Microphone and PIR Sensor Flex PCB has foam tape on both sides, and a rubber cavityRubber Cavity Cap that surrounds the Microphoneseach Microphone. The foam tapeFoam Tape, and rubber cavityRubber Cavity Caps can be removed to allow a close up view of the Microphones
[* black] The Microphone and PIR Sensor Flex PCB has foam tape on both sides, and a rubber cavityRubber Cavity Cap that surrounds the Microphoneseach Microphone. The foam tapeFoam Tape, and rubber cavityRubber Cavity Caps can be removed to allow a close up view of the Microphones