Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] With the Large EMI / Heat Shield removed, we can now remove the Microphone,Flex PCB that contains the Microphones, Light Detector, Multi-Color LED and PIR Sensor Flex PCB
[* black] Use a pair of long needle nose pliersLong Needle Nose Pliers to pull the metal shield tapeMetal Shield Tape from the backside of the Camera Assemble Body.
[* black] From the front sidefrontside of the Camera Assembly Body, pull the metal shielding tapeMetal Shielding Tape through the hole to the backside of the Camera Assembly Body
[* black] Use the Spudger Tool to gently pry out the Microphone and PIR Sensor Flex PCB. The Flex PCB is held in place withby double stick foam tape
[* black] The Speaker can also be removed after the metal shield tapeMetal Shield Tape has been removed by pulling the speaker cable through the hole between the backside and front sidefrontside of the Camera Assembly Body that was occupied by the metal shield tapeMetal Shield Tape
[* black] With the Large EMI / Heat Shield removed, we can now remove the Microphone,Flex PCB that contains the Microphones, Light Detector, Multi-Color LED and PIR Sensor Flex PCB
[* black] Use a pair of long needle nose pliersLong Needle Nose Pliers to pull the metal shield tapeMetal Shield Tape from the backside of the Camera Assemble Body.
[* black] From the front sidefrontside of the Camera Assembly Body, pull the metal shielding tapeMetal Shielding Tape through the hole to the backside of the Camera Assembly Body
[* black] Use the Spudger Tool to gently pry out the Microphone and PIR Sensor Flex PCB. The Flex PCB is held in place withby double stick foam tape
[* black] The Speaker can also be removed after the metal shield tapeMetal Shield Tape has been removed by pulling the speaker cable through the hole between the backside and front sidefrontside of the Camera Assembly Body that was occupied by the metal shield tapeMetal Shield Tape