Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Robert Shuler

Edição aprovada por Robert Shuler

Antes
Depois
Sem alteração

Linhas de Passo

[* black] TheWith the camera assembly PH00 screwsface plate removed, use the Spudger Tool to pry the camera face plateassembly away from the camera body
[* black] Once the camera face plateassembly comes loose, pry up on the two plastic tabs on the bottom of the camera face plateassembly that hold the camera face plateassembly to the camera body PCB
[* black] Pull the camera assembly away from the assembly body
[* blue] The camera assembly is held in place by zero insertion force connectors to the main pcb in the camera body
[* black] TheWith the camera assembly PH00 screwsface plate removed, use the Spudger Tool to pry the camera face plateassembly away from the camera body
[* black] Once the camera face plateassembly comes loose, pry up on the two plastic tabs on the bottom of the camera face plateassembly that hold the camera face plateassembly to the camera body PCB
[* black] Pull the camera assembly away from the assembly body
[* blue] The camera assembly is held in place by zero insertion force connectors to the main pcb in the camera body

Imagem 3

Nenhuma imagem anterior

Adicionado