Skip to main content

Alterações no passo #4

Edição por Gregory Caporale

Edição aprovada by Gregory Caporale

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Once you have removed the outer bezel you can start on the LCD panel itself.
[* black] Now is also a good time to replace the LCD Inverter which is located at the bottom of the LCD. There is a single screw that holds it in place. Then there are two cables that plug into the inverter.
[* black] To remove the LCD screen, remove the screws from the side of the LCD screen. There should be 4 on each side.