Alterações no passo nº 3
Edição por Robin Taylor —
Edição aprovada por Robin Taylor
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] (Optional) If you are keeping the cooler you should clean it thoroughly! |
|---|---|
| + | [* light_blue] When your CPU is working under high load it will generate heat approaching it TDP. If the heatsink of the cooler is clog with dust and debit of the fan is not working will the CPU will over heat. You do not want this to happen! |
| + | [* light_blue] As you can see a lot of dust had built up under the heatsink, even though the top had recently been cleaned! |
| + | [* blue] How far you go in cleaning the heatsink is your decision. I removed the Fan assembly to clean it thoroughly. |
| + | [* light_blue] The Fan assembly was held on with four plastic clips. very carefully us a flat blade screw driver to pry the clip up a little and push it up, repeat until the fan comes assembly comes off. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado