Alterações no passo nº 1
Edição por Andrew Optimus Goldheart —
Edição aprovada por Andrew Optimus Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use a plastic opening tool to gently pry the digitizer connector up from its socket on the logic board. ***BE EXTREMELY CAREFUL AS THE SOCKET CAN BE EASILY DAMAGED OR PINS MAY COME LOOSE RENDERING THE SOCKET USELESS*** |
|---|---|
| + | [* black] Use a plastic opening tool to gently pry the digitizer connector up from its socket on the logic board. |
| + | [* icon_caution] Be very careful to pry evenly on the connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work. |