Conserte seus objetos Comunidade Loja

Alterações no passo nº 8

Edição por Kristen Gismondi —

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

[* black] Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
[* black] Put the wire through the loop with about 6" excess.
[* black] Place the anchors for the wall a few inches above the screws and slightly centered.
-[* black] Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop.
+[* black] Pull taut on the wire where the anchors are and put the opposite end of the wire through the loop.