Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] ManyUse a T5 Torx driver to remove the 13 screws securing the trackpad assembly:
[* red] New line.Nine 5.8 mm screws
[* orange] New lineFour 4.9 mm screws
[* icon_reminder] These screws all look similar—be careful not to mix them up.
[* icon_reminder] Adding a little blue threadlocker to the screw threads during reassembly can help prevent the screws from working themselves loose over time.
[* icon_reminder] Install the screws loosely at first, and then check the trackpad alignment before tightening them down
.
[* black] ManyUse a T5 Torx driver to remove the 13 screws securing the trackpad assembly:
[* red] New line.Nine 5.8 mm screws
[* orange] New lineFour 4.9 mm screws
[* icon_reminder] These screws all look similar—be careful not to mix them up.
[* icon_reminder] Adding a little blue threadlocker to the screw threads during reassembly can help prevent the screws from working themselves loose over time.
[* icon_reminder] Install the screws loosely at first, and then check the trackpad alignment before tightening them down
.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado