Pular para o conteúdo principal

Alterações no passo #13

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] DoContinue with the same with the lastleft side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.
[* icon_note] At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.
[* black] DoContinue with the same with the lastleft side of the LCD: insert the flat end of the spudger between the LCD and shield plate and insert the spudger as far as it will go.
[* icon_note] At this point the LCD should be loosened from the adhesive holding it. If it is not, re-insert the spudger on the right side or top to fully free the LCD.