Pular para o conteúdo principal

Alterações no passo #10

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
[*
black] Insert wisdom herethe flat end of a spudger between the LCD frame and the metal backing plate.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. The plate is screwed down to the rear case, so prying up on it will damage it
.
[* icon_note] In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.
[*
black] Insert wisdom herethe flat end of a spudger between the LCD frame and the metal backing plate.
[* icon_caution] Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. The plate is screwed down to the rear case, so prying up on it will damage it
.