Pular para o conteúdo principal

Alterações no passo #7

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The LCD is glued to the metal LCD shield plate behind it along itsthe top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slideshift the LCD slightlya couple of millimeters left and right several times.
[* icon_note] The LCD is glued to the metal LCD shield plate behind it along itsthe top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slideshift the LCD slightlya couple of millimeters left and right several times.
[* black] Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.