Pular para o conteúdo principal

Alterações no passo #7

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] The LCD is glued to the metal LCD shield plate behind it along its top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slide the LCD slightly left and right several times.
[*
black] Insert wisdom herea guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case
.
[* icon_note] The LCD is glued to the metal LCD shield plate behind it along its top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to slide the LCD slightly left and right several times.
[*
black] Insert wisdom herea guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.
[* black] Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case
.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Excluído