Alterações no passo nº 1
Edição por Jennifer Lai —
Edição aprovada por Jennifer Lai
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Move the lenses as close together as possible by sliding the button on the bottom of the frame towards the center of the frame. | |
| - | [* red] Remove the four |
| + | [* red] Remove the four Philips #00 (4mm) screws from the outer edge of the base of the lenses. |
| [* icon_note] There are two screws that are near the lens that are difficult to see. Remove the screw that is the nearest to the lens. Do not remove the larger screw farther from the lens. |