Pular para o conteúdo principal

Alterações no passo #2

Edição por Shawn Vernon

Edição aprovada por Shawn Vernon

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove partRemoval of the back casinghalf of the casing.
[* black] Locate and InsertUsing a thin plastic flat head screw driver, or similar item. On the pry tool intoside of the plasticphone insert the thin edge that runs alonginto the sidesvisible split between the 2 halves of the phone.
[* black] Use a prying motion to lift the casing up. This will separate the phone casing.
[* black] Remove partRemoval of the back casinghalf of the casing.
[* black] Locate and InsertUsing a thin plastic flat head screw driver, or similar item. On the pry tool intoside of the plasticphone insert the thin edge that runs alonginto the sidesvisible split between the 2 halves of the phone.
[* black] Use a prying motion to lift the casing up. This will separate the phone casing.
[* black] Repeat this motion all around the screen edge until the casing pops off.