Pular para o conteúdo principal

Alterações no passo #21

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.
[* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing.
[*
black] SlideWith a new pick, slice gently over the plastic opening tool aroundleft-hand antenna, stopping before the home button.
[* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
[* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.
[* black] Leave
the iPad's top right cornerpick in place before moving on.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado