Pular para o conteúdo principal

Alterações no passo #19

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat
the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.
[* black] Slide the plasticLeave the opening tool alongpicks in place and reheat the top edge, separatingiOpener.
[* icon_caution] Remember not to overheat
the edge of the front panel from the rear caseiOpener—no more than once every two minutes.
[* black] LeaveSet the plastic opening tool inreheated iOpener on the gaphome button end of the iPad and let it rest for a few minutes to soften the adhesive beneath the front panel, near the iPad's top right cornerglass.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Excluído

Imagem 3

Excluído