Pular para o conteúdo principal

Alterações no passo #9

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] InsertReheat the plastic opening tool intoiOpener and place it on the gap betweentop edge of the front panel and rear case, nextiPad, over the front-facing camera.
[* icon_caution] Be careful not
to overheat the lower placeholder guitar pick.
[* black] Slide
iOpener during the opening tool aroundrepair procedure. Wait at least two minutes before reheating the corner, separatingiOpener.
[* icon_note] If you have a flexible iOpener, you can bend it to heat both the upper left corner and
the front panel fromupper edge at the rear casesame time.
[* black] InsertReheat the plastic opening tool intoiOpener and place it on the gap betweentop edge of the front panel and rear case, nextiPad, over the front-facing camera.
[* icon_caution] Be careful not
to overheat the lower placeholder guitar pick.
[* black] Slide
iOpener during the opening tool aroundrepair procedure. Wait at least two minutes before reheating the corner, separatingiOpener.
[* icon_note] If you have a flexible iOpener, you can bend it to heat both the upper left corner and
the front panel fromupper edge at the rear casesame time.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Excluído

Imagem 3

Excluído