Pular para o conteúdo principal

Alterações no passo #8

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.
[* black] PlaceTake the iOpener acrossfirst pick you inserted and slide it up toward the bottom ontop corner of the iPad, after reheating it for 30 seconds if it has cooled downiPad.
[* black] Letred] If you can see the iOpener sit for at least 90 seconds, to warm and softentip of the adhesive beneathopening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this section ofas it may deposit adhesive on the front panelof the LCD that is difficult to clean off.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado