Pular para o conteúdo principal

Alterações no passo #5

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Place the iOpener back onalong the iPad, after reheating itright edge of the iPad and wait for 30-60 seconds if it has cooled downto warm the adhesive back up.
[* icon_note] Place the iOpener back onalong the iPad, after reheating itright edge of the iPad and wait for 30-60 seconds if it has cooled downto warm the adhesive back up.
[* black] Insert a guitar pick about 1/4" into the crack between the front panel and the rear case, to the left of the plastic opening tool.
[* icon_note] The guitar pick will serve as a placeholder, to keep the gap spread so the adhesive doesn't reseal the iPad shut as you move the plastic opening tool.
[* icon_caution] Be careful not to insert the guitar pick too deep, as it could scratch and damage the front of the LCD.