Pular para o conteúdo principal

Alterações no passo #5

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Place the iOpener back along the right edge of the iPad and wait about a minute for it to warm the adhesive back up.
[*
black] Insert a guitar pick 1/4" into the crack between the front panelReheat and reapply the rear case, to the left of the plastic opening tool.
[* icon_note] The guitar pick will serve as a placeholder, to keep the gap spread open so the adhesive doesn't reseal the iPad shut as you move the plastic opening tool
iOpener.
[* icon_caution] Be careful not to insertoverheat the guitar pick too deep, asiOpener during the repair procedure. Always wait at least two minutes before reheating the iOpener.
[* black] Let
it could scratch and damagerest for a few minutes to reheat the frontleft edge of the LCDiPad.
[* icon_note] Place the iOpener back along the right edge of the iPad and wait about a minute for it to warm the adhesive back up.
[*
black] Insert a guitar pick 1/4" into the crack between the front panelReheat and reapply the rear case, to the left of the plastic opening tool.
[* icon_note] The guitar pick will serve as a placeholder, to keep the gap spread open so the adhesive doesn't reseal the iPad shut as you move the plastic opening tool
iOpener.
[* icon_caution] Be careful not to insertoverheat the guitar pick too deep, asiOpener during the repair procedure. Always wait at least two minutes before reheating the iOpener.
[* black] Let
it could scratch and damagerest for a few minutes to reheat the frontleft edge of the LCDiPad.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Excluído