Pular para o conteúdo principal

Alterações no passo #2

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_note] Throughout the following procedure, you'll be placing the iOpener on the iPad to soften adhesive at several locations. Ensure the iOpener is hot before placingblack] Handling it onby the iPad, and reheat it in the microwave for 30 seconds as needed.
[* icon_caution] Be careful not to overheat the iOpener; never microwave it for longer than 30 seconds, and always wait at least two minutes before reheating the iOpener.
[* black] Lay
tab, place the heated iOpener flat on the right edgeside of the iPad, smoothing it out so that there is good contact betweeniPad to the surfaceleft of the iPad and the iOpenerhome button assembly.
[* black] Let the iOpener sit on the iPad for approximately 90 seconds before continuing onabout five minutes to opensoften the front panel.
[* icon_caution] As you may find yourself working with broken glass during this procedure, we recommend wearing [product|IF145-125|safety glasses] for protection from flying shards
adhesive beneath the glass.
[* icon_note] Throughout the following procedure, you'll be placing the iOpener on the iPad to soften adhesive at several locations. Ensure the iOpener is hot before placingblack] Handling it onby the iPad, and reheat it in the microwave for 30 seconds as needed.
[* icon_caution] Be careful not to overheat the iOpener; never microwave it for longer than 30 seconds, and always wait at least two minutes before reheating the iOpener.
[* black] Lay
tab, place the heated iOpener flat on the right edgeside of the iPad, smoothing it out so that there is good contact betweeniPad to the surfaceleft of the iPad and the iOpenerhome button assembly.
[* black] Let the iOpener sit on the iPad for approximately 90 seconds before continuing onabout five minutes to opensoften the front panel.
[* icon_caution] As you may find yourself working with broken glass during this procedure, we recommend wearing [product|IF145-125|safety glasses] for protection from flying shards
adhesive beneath the glass.

Imagem 1

Versão Antiga

Nova Versão